Chain Link Fence Machine

OVERVIEWS

Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.

•The chain link is automatically wound to form rolls when the desired length is manufactured.
•The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
•One side or both sides of the end of net hole is twisted or with burr in edge.
•Use compacting machine to make it into rolls.

Width scope of weaving	1-4 m
Diameter of wire	2-5 mm (depend on the mesh size)
Mesh Size	30-80 mm
Speed of the axle of shaped knife	275-1100 rpm (variable speed)
Power consumption	five motors, altogether in 8.9kW
The output per minute for example	If the mesh is 50*50mm, width: 2m, the output will be: 1m/2min.
Suitable wire to the machine	The tensile scope of the wire 300-500N/M*M
Weight of equipment	4200 kg
Outside size	6700×1430×1800 mm

SERVICE HOTLINE

Whatsapp/Wechat:+86 13623289181

Email: ty1@dianhanwang.com